 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 8700 E. Thomas Road Scottsdale, AZ 85252 Tel: (480) 941-6300 Fax: (480) 947-1503 SMP6LC5.0 Thru DESCRIPTION (600 watt) This 16 pin 2 line Bidirectional LOW CAPACITANCE array is designed for use in applications where protection is required at the board level. Providing protection from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4, and effects of secondary lighting as stated by IEC 1000-4-5. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a peak power of 600 watts for an 10x1000 sec pulse and are designed to be used for secondary surge protection on telephone lines. This device can be used in either common or differential mode applications. For example in the circuit diagram on the following page use: TIP to (A) and (C) to ground, RING to (B) and (D) to ground for common mode, or TIP to (A) and RING to (C), or TIP to (B) and RING to (D) for differential mode. SMP6LC12 TVSarrayTM Series TM FEATURES * * * * * * 600 watts Peak Pulse Power 10x1000 Protects up through 12 Volt Components Protects 4 Unidirectional lines or 2 Bidirectional Lines Provides electrically isolated protection SO-16 Packaging UL 94V-0 Flammability Classification MECHANICAL * * * * Molded SO-16 Surface Mount Weight: 0.128 grams (approximate) Body Marked with Logo, and device number Pin #1 defined by DOT on top of package PACKAGING * * * Tape & Reel EIA Standard 481-1-A 13 inch reel 2,500 pieces (OPTIONAL Carrier tubes 50 pcs per (STANDARD) MAXIMUM RATINGS * * * * Operating Temperatures: -55 C to +150 C 0 0 Storage Temperature: -55 C to +150 C Peak Pulse Power: 600 Watts (10/1000 sec, Figure 1 and 2) Pulse Repetition Rate: <.01% 0 0 ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless otherwise specified STAND-OFF VOLTAGE VWM BREAKDOWN VOLTAGE VBR @10 mA VOLTS MIN 6.0 7.22 13.3 CLAMPING VOLTAGE VC @ IPP VOLTS MAX 9.6 12.4 19.9 MAXIMUM LEAKAGE CURRENT @VWM ID A TYP 300 300 2.0 PEAK PULSE CURRENT @ 10/1000 S IPP AMPS TYP 10 10 10 CAPACITANCE (f=1 MHz) @0V C PER LINE PAIR pF TYP 30 30 30 PART NUMBER DEVICE MARKING VOLTS MAX SMP6LC05 SMP6LC6.5 SMP6LC12 SMP6LC5.0 SMP6LC6.5 SMP6LC12 5.0 6.5 12.0 NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product selected voltage should be equal to or greater than the continuous or peak operating voltage of the circuit to be protected. Application: The SMP6LCXX product is designed for transient voltage suppression protection of components at the board level. It is an ideal product to be used for protection of HIGH SPEED I/O TRANSCEIVERS. MSC1379.PDF ISO 9001 CERTIFIED REV C 10/15/99 SMP6LC6.5 thru SMP6LC12 WAVE FORMS 100 PPP Peak Pulse Power - kW 10 1 0.1 1 10 100 1000 Td Pulse Duration S 10000 100000 FIGURE 1 Peak Pulse Power Vs Pulse Time FIGURE 2 Pulse Wave Form MOUNTING PAD SO-16 CIRCUIT DIAGRAM SO-16 PACKAGE A INCHES DIM MIN 0.358 0.150 0.053 0.011 0.016 0.050 BSC 0.006 0.004 0.189 0.228 0.010 0.008 0.206 0.244 MAX 0.398 0.158 0.069 0.021 0.050 MILLIMETERS MIN 9.09 3.81 1.35 0.28 0.41 1.27 BSC 0.15 0.10 4.80 5.79 0.25 0.20 5.23 6.19 MAX 10.10 4.01 1.75 0.53 1.27 B P A B C D G F D C K J G L J K L P F MSC1379.PDF ISO 9001 CERTIFIED REV C 10/15/99 |
Price & Availability of SMP6LC05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |